From 4b8c6190da98b526e802fdcdca33dc15ede83e52 Mon Sep 17 00:00:00 2001 From: David Date: Sat, 5 Oct 2019 15:14:45 +0000 Subject: [PATCH] Update component placement, pcb trace-width in process. --- Hardware/HughesTelematics.brd | 425 ++++++++++++++++------------------ Hardware/HughesTelematics.sch | 282 +++++++++++----------- 2 files changed, 339 insertions(+), 368 deletions(-) diff --git a/Hardware/HughesTelematics.brd b/Hardware/HughesTelematics.brd index 6fcb17b..2d321af 100644 --- a/Hardware/HughesTelematics.brd +++ b/Hardware/HughesTelematics.brd @@ -23,17 +23,17 @@ - + - - - - - - + + + + + + @@ -46,10 +46,10 @@ - - - - + + + + @@ -58,8 +58,8 @@ - - + + @@ -6195,7 +6195,7 @@ Resistors, varistors, thermistors, trimmers/potentiomerers, resistor arrays - + @@ -6333,114 +6333,80 @@ for 12.25 mm coin cell. Typically 3v. - - - - + +<b>EAGLE Design Rules</b> <p> -<b>Eurocircuits-EAGLE design rules</b><br> -<br> -Setup for <b>2-layer PatternClass6 BaseCopperO18 eCDefault</b> +Die Standard-Design-Rules sind so gewählt, dass sie für +die meisten Anwendungen passen. Sollte ihre Platine +besondere Anforderungen haben, treffen Sie die erforderlichen +Einstellungen hier und speichern die Design Rules unter +einem neuen Namen ab. +<b>EAGLE Design Rules</b> <p> - The option <b>Sizes-Minimum Drill</b> is set to 0.35mm. This minimum drill endsize can be set lower if needed. Values below 0.25mm will result in a higher DrillClassification. For details see the Eurocircuits Classification overview. -<p> -<u>Extra Notes:</u><br> -- The option <b>Distance-Copper/Dimension</b> is set to 0.25mm, the default for boards with a routed boardoutline. If you require Vcut on your board this parameter should be set to 0.45mm.<br> -- The option <b>Supply-Generate thermals for vias</b> is on by default but may be changed if required.<br> -- The option <b>Mask-Stop</b> is set to 0mm oversize which is the preffered value.<br> -- The option <b>Mask-Cream</b> is set to 0mm oversize by default, but may be changed if required<br> -- The option <b>Mask-Limit</b> is set to 0.45mm, resulting in covered or tented via holes for vias of 0.45mm and smaller. The option may be changed if required.<br> -- The options <b>Shapes</b> and <b>Misc</b> are not relevant. Values for <b>Shapes-Smds-Roundness</b> are not critical and can be set as you require. -<p> -<p> -You can set higher minimum values if you wish, setting lower minimum values is <u>not advisable</u>.<br> -If you need lower minimum values, please use a different Eurocircuits-EAGLE design rule file. For details see the Eurocircuits-EAGLE dru overview table. -<p> -Your Eurocircuits Team - - - - -<p> -<b>Eurocircuits-EAGLE design rules</b><br> -<br> -Setup for <b>2-layer PatternClass6 BaseCopperO18 eCDefault</b> -<p> - The option <b>Sizes-Minimum Drill</b> is set to 0.35mm. This minimum drill endsize can be set lower if needed. Values below 0.25mm will result in a higher DrillClassification. For details see the Eurocircuits Classification overview. -<p> -<u>Extra Notes:</u><br> -- The option <b>Distance-Copper/Dimension</b> is set to 0.25mm, the default for boards with a routed boardoutline. If you require Vcut on your board this parameter should be set to 0.45mm.<br> -- The option <b>Supply-Generate thermals for vias</b> is on by default but may be changed if required.<br> -- The option <b>Mask-Stop</b> is set to 0mm oversize which is the preffered value.<br> -- The option <b>Mask-Cream</b> is set to 0mm oversize by default, but may be changed if required<br> -- The option <b>Mask-Limit</b> is set to 0.45mm, resulting in covered or tented via holes for vias of 0.45mm and smaller. The option may be changed if required.<br> -- The options <b>Shapes</b> and <b>Misc</b> are not relevant. Values for <b>Shapes-Smds-Roundness</b> are not critical and can be set as you require. -<p> -<p> -You can set higher minimum values if you wish, setting lower minimum values is <u>not advisable</u>.<br> -If you need lower minimum values, please use a different Eurocircuits-EAGLE design rule file. For details see the Eurocircuits-EAGLE dru overview table. -<p> -Your Eurocircuits Team - +The default Design Rules have been set to cover +a wide range of applications. Your particular design +may have different requirements, so please make the +necessary adjustments and save your customized +design rules under a new name. - - + + - - - - + + + + - - + + - + - - - - - - - - + + + + + + + + - + - - - - - + + + + + - + - - + + - + - - + + @@ -6592,13 +6558,13 @@ Your Eurocircuits Team - - - - - - - + + + + + + + @@ -6932,8 +6898,8 @@ Your Eurocircuits Team - - + + @@ -7199,7 +7165,7 @@ Your Eurocircuits Team - + @@ -7326,7 +7292,7 @@ Your Eurocircuits Team - + @@ -7517,7 +7483,7 @@ Your Eurocircuits Team - + @@ -7583,16 +7549,16 @@ Your Eurocircuits Team - - + + - - + + @@ -7767,11 +7733,11 @@ Your Eurocircuits Team - - + + - + @@ -7796,15 +7762,14 @@ Your Eurocircuits Team - - - - - + + + + @@ -7886,75 +7851,79 @@ Your Eurocircuits Team - + - - - - - - + + + + + + + + - + - - - - - - - - - + + + + + + + - + - - - - - - - - - + + + + + + + + + + + + - + - - - - - + - + + + + + - - - - + + + + - - - - - + + + + + + @@ -8026,9 +7995,10 @@ Your Eurocircuits Team - - - + + + + @@ -8073,14 +8043,14 @@ Your Eurocircuits Team - - + + - - + + @@ -8212,9 +8182,11 @@ Your Eurocircuits Team - - - + + + + + @@ -8236,7 +8208,7 @@ Your Eurocircuits Team - + @@ -8555,9 +8527,9 @@ Your Eurocircuits Team - - - + + + @@ -8852,15 +8824,15 @@ Your Eurocircuits Team - + - - - - - + + + + + @@ -9089,37 +9061,37 @@ Your Eurocircuits Team - - - - - - - - - - - - - - + + + + + + + + + + + + + + - - + + - + - + - - - + + + - + - + @@ -9127,18 +9099,18 @@ Your Eurocircuits Team - - + + - - - - - - - + + + + + + + @@ -9149,33 +9121,32 @@ Your Eurocircuits Team - + - - - - - - - - + + + + - - - - - - - - - + + + + + + + + + + + + diff --git a/Hardware/HughesTelematics.sch b/Hardware/HughesTelematics.sch index 9d8ad73..635b4ef 100644 --- a/Hardware/HughesTelematics.sch +++ b/Hardware/HughesTelematics.sch @@ -6,36 +6,36 @@ - + - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -44,8 +44,8 @@ - - + + @@ -53,19 +53,19 @@ - - - - - - - - - - - - - + + + + + + + + + + + + + @@ -8324,7 +8324,91 @@ Source: http://www.onsemi.co.jp .. LM137M-D.PDF - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE +1 +10 +20 +21 +30 +40 + + + + + + + + + + + + + + + + + + + + + + <b>Dual Row Socket</b><br/> For an mbed LPC1768 module. @@ -8433,93 +8517,9 @@ For an mbed LPC1768 module. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE -1 -10 -20 -21 -30 -40 - - - - - - - - - - - - - - - - - - - - - - + <b>mbed module LPC1768</b><br/> developer site: <a href="http://developer.mbed.org">http://developer.mbed.org</a> @@ -8733,15 +8733,15 @@ RXD3 - + <b>mbed module</b><br> Available as a single, or a socket with two rows of pins duplicated. To establish the electrical connection, you can do the initial wiring to it, then jiggle the component itself so that the wires snap to the alternate connections.<br> <b>be sure to run electrical and design rule checks</b> - + - + @@ -8788,7 +8788,7 @@ Available as a single, or a socket with two rows of pins duplicated. To establis - + @@ -9171,7 +9171,7 @@ for 12.25 mm coin cell. Typically 3v. - + @@ -10228,7 +10228,7 @@ and SCH L2 to PCB L1. - + @@ -10933,7 +10933,7 @@ Description: CONN HDR 10POS 0.079 GOLD PCB - + @@ -10942,14 +10942,14 @@ Description: CONN HDR 10POS 0.079 GOLD PCB - + - + @@ -10958,7 +10958,7 @@ Description: CONN HDR 10POS 0.079 GOLD PCB - + @@ -11120,7 +11120,7 @@ Description: CONN HDR 10POS 0.079 GOLD PCB - +